Description
Face : Pure chlorine-free (ECF) pulp wet strength paper, felt-marked on both sides. With an ULTRA WS treatment. FSC Mix Credit.
Adhesive : Water-based permanent acrylic adhesive. Good adhesion to wet surfaces at low temperatures. Especially designed for glass containers, with excellent resistance to immersion in water/ice.
Liner : White supercalendered glassine paper one side siliconised. There may be slight variations in tone.
BrandManter
ApplicationsProduct specially designed for high added value bottled in glass (wine, liquors, oil, water,....)
Uses & ApplicationsWine, Spirits & Craft Beer, Beverage
Additional informationThe ultra WS treatment of the face material avoids the creases formation and reduces the water absorption on the face surface.
We recommend the reels to be wound with the face side out. Suitability for neck labels should be thoroughly checked and validated. Not suitable for very small radius. If possible, consider using a product from the Fedrigoni's neck label range for this application. In doubt contact Fedrigoni's technical support team for advice. The test of resistance is carried out by sticking a blank (unprinted) label on a standard glass bottle. Five days after the label is stuck on, it is submerged in an ice bucket containing icy water for a minimum period of 4 hours and its resistance to immersion is checked.
Shelf life2 years, under storage conditions as defined by FINAT section 2.5 (20-25°C, 40-50% RH). Prolonged storage at higher temperatures and/or humidity levels will shorten the shelf life of the product.
FSC / PEFC FaceFSC MIX CREDIT
Printing TechnologyCan be used without problems with the main printing systems: letterpress, offset, blind embossing, hot foil stamping, thermography and screen printing. The characteristic felt marking requires specific printing pressure settings. Varnishing and plastic laminating must be assessed in advance. The varnishing coated with an offset machine is almost fully absorbed and therefore does not improve gloss or protection. Screen-printing varnishing achieves better results, although it is often necessary to perform two shots to achieve a distinctly evident result. The surface roughness typical of felt marked papers may give rise to micro defects with plastic laminating caused by incomplete adhesion of the film to the substrate.Testing for suitability between media, printers and inks is always recommended prior to use.
FaceACQUERELLO BIANCO ULTRA WS FSC™
DescriptionPure chlorine-free (ECF) pulp wet strength paper, felt-marked on both sides. With an ULTRA WS treatment. FSC Certified.
FaceExclusive
Face Grammage (gr/m2)110
Face Thickness (µm)145
AdhesiveSH6020 PLUS
DescriptionWater-based permanent acrylic adhesive. Good adhesion to wet surfaces at low temperatures. Especially designed for glass containers, with excellent resistance to immersion in water/ice.
Adhesive typePermanent
Tack (N) glass FTM-914
Min Labelling temperature (°C)+5
Usage temperature (°C)-10/+75
LinerWG80
DescriptionWhite supercalendered glassine paper one side siliconised. There may be slight variations in tone.
Grammage (gr/m²) ISO 53678
Thickness (µm) ISO 53467
Liner TypeGlassine
ACQUERELLO BIANCO ULTRA WS FSC™ / SH6020 PLUS / WG80
Code: WNE4202
Type: Permanent
Grammage
Face Grammage (gr/m2) 110 gr/m²
emea
english
french
german
italian
spanish